1991 Mitsubishi Mighty Max "measure master manual" Questions

Ad

Question about Mitsubishi Mighty Max

1 Answer

...master cylinder may be not bleeding off properly when cold or slave sticks when cold. you need to measure pedal free play that is how far pedal goes down before resistance is felt there needs to be ...

Ad

Question about Mitsubishi Mighty Max

2 Answers

...you will see evidence of this when you open the bonnet. Top up the master cyl with new fluid and bleed the cylinder - this is a temporary measure until you get the cylinders replaced or

Ad

Question about Mitsubishi Mighty Max

2 Answers

...to 0.59 thousandths. (About 11/32nds to almost 19/32 of an inch) 9 to 15mm. This is the free play measurement of the clutch master cylinder piston, to the pushrod contacting the clutch pedal arm.

...manual) and basically flickers on and off while driving. Is this a warning of some kind that I need to fix? Car has been serviced and is in good shape (104,0000 miles). You have one of two problems. ...

master... is not blowing up the EXPLOSIVES inside your car by tripping the WRONG WIRES. Test LOGIC: Next most important element you want to attend... those things that ARE WORKING all indicate areas..

Question about GMC Cars & Trucks

1 Answer

...master cylinder to each wheel. The lines are typically made of steel and are routed along the frame rails and body of the vehicle. There are also flexible hoses that connect the brake lines to the ...

Question about Mitsubishi Mighty Max

1 Answer

...measure the pin size and compare them to the ones you have. If they are not the same it may be possible to find balljoints with the proper size pin that will fit the mustang control and A arms. ...

...master and pump the brake while someone watches underneath. Likely you have broken one of the brake lines and you will find fluid squirting out while pumping. Most lines are not terribly difficult to ...

... It also pays to check that the clutch pedal free travel is within specification (about ¼ inch measured at the pedal rubber) to ensure the hydraulic system works properly. This is done by ...

Question about Mitsubishi Mighty Max

1 Answer

...measure of resistance the bigger coils should have a break in it somewhere. As for the power windows, these widows have a separate circuit power there should be a fuse panel located bottom right foot ...

Not finding what you are looking for?
1991 Mitsubishi Mighty Max Logo

210 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...