1986 Mitsubishi Mighty Max "4 cylinder" Questions

need firing order for 1994 mighty max pickup I do not know if you have the 2.4L or 3.0L. However I have included both below, although I think you should have the 3.0L For the 2.4L: Firing Order: 1-3-4

...4 or 6 brake lines attached to it. The clutch master cylinder should usually have one brake line attached to it. If you will follow that brake line down, you should find the slave cylinder at the ...

...four cylinder engine firing order most if not all are useually are  1 - 3 - 4 - 2 this is four cylinder fireing order good luck it will work  this is the order in which they should ...

4 cylinder shows top pulley for ac belt, needs to be loosened. to release tension. 6 cylinder shows tensioner pulley on mounting bracket for compressor. Loosen the bolt for tensioner pulley to release

4-5-6 (Gee, that's hard one to remember!... LOL ;) ) The ditributor cap should have the cylinder numbers cast into it at each plug tower - most Mitsubishi caps do. The cylinders are numbered 1-3-5

4 cylinder engine, you will be needing to get a repair manual, as it will take many pages of instruction to do this job. Perhaps 20-30 pages, or more. I should recommend you go to car parts store or a

...Cylinder, Remove the Starter (2 bolts, 2 wires. Bolts are 14mm, 1 wire is 12mm, 1 plugs in), Remove the Driveshaft(s) (4 12mm bolts) Remove the 6 bolts from the bellhousing (4 are 14mm, 2 are 10mm) ...

...4 or 6 cylinder engine. On the Mitsubishi 4 cylinder motor, the only thing that is needed to do is remove the valve cover and remove the rocker rod. (2 rods which hold the rocker assembly.) Next is ...

What is the gap on the plugs for a 94 Mighty Max 4 cylinder 25 - 30 thou

proceed.  Have you checked for vac leaks and know for a fact the engine has compression on all 4 cylinders