2006 Chevrolet Trailblazer "replace dash cluster bulb 2000" Questions

...dash with the motors that make the individual gauges work. I would check the oil pressure with a manual gauge. If you don't have the skills to do this yourself, a qualified shop wouldn't charge much ...

...Replace the bulbs that are blown. Turn each bulb counterclockwise to unlock it from the dash cluster assembly, then pull the bulb straight out of the housing. Insert the new bulb, align the tabs on ...

...dash light is out on my 2000 nissan frontier. Its only a portion though, between the 55mph mark and the 110mph mark on the speedometer. I have checked fuses 11 and 39 and they both work perfectly. Is ...

cluster out of the dash and take each bulb out individually to see which one is bad then replace it/them and reinstall the instrument cluster back in the dash. It sounds a lot harder than it really is

dash structure. Remove those and carefully pull the cluster out and turn it toward the left side. Reach behind the cluster and unplug the connectors. The bulbs are in removable black sockets which you

...replace the complete instrument cluster, get one from a junk yard 100 bucks. this will take some time but is fairly easy. you have to remove the dash pieces on that side. then this will allow you ...

dash cluster in  carefully pull cluster  and unplug any wire harness as thier should not be any speedo cable  on a 2000 model on back side of cluster u will  find bulb hold in tabs

...replace remove the black trim around the cluster.. then remove the 4 srews that hold the cluster in the dash.. the bulb will twist out of the back of the cluster main board. the new one will just ...

how to burned outlight bulb on dash board gauge cluster will have to be removed and the faulty bulb be replaced then reinstall gauge cluster Caution : small pins on connectors easly broken (not good)

...replace dash lights in my 2000 4runner? Dash lights are basically out on both sides of dash and the middle is almost not visible at night. How do I replace the lights? You have to remove the ...