2006 Chevrolet Monte Carlo "reset computer" Questions

...reset the computer un hook the battery cable the posative and tuch the cable to a ground for 3 to 5 min that will clear your computer you will have to put the time and raido stations byt all and all ...

How to reset 2001 Monte Carlo computer Just disconnect the negative or black battery post for about a minute and that will reset the computer.

...reset the computer on a 2004 chev monte carlo You can reset the vehicles PCM ( computer) to factory default by disconnecting both negative and positive battery cables for 20 minutes. All calibrations ...

reset computer YOU NEED A CODE SCANNER TO ERASE PCM CODES. YOU NEED TO PULL DTCS FIRST TO KNOW WHY THE CHECK ENGINE LIGHT IS ON? IF THIS IS THE CASE YOU NEED A AUTO SCANER. BUT IF YOU WANT TO RESET ...

...reset computer? Disconnect the positive battery terminal, then the negative. Let it set for a few minutes, most recommend 10 minutes. Once the time is up, reconnect the negative, then the positive ...

...reset the indicator lights for 'check engine' & tire pressure - what do I do? No manual bought used. The " Check Engine" pertains to the computer sysytem informing you of a failure code stored. In ...

...i need to reset my brake light in my car disconnect the battery for 5-10 minutes, reconnect an cycle the key on an off 3 times (not starting it) this resets the computer an should solve your ...

...all the electronic components in newer vehicles, anytime major service is done the system computer module needs to be reset. Take the car back to whomever serviced the trans and have them do a

.......any help with this one??? you will need to drive about 50 miles till the computer checks the system since it was reset. Your check engine light may come back again, if it does run a vacum

...computer by disconnecting the batt. cables for one minute if it comes back on you need no access the code and get the problem isolated if it does not reset any parts store will tell you how to ...