2004 Chevrolet TrailBlazer "remove rear door speaker" Questions

...remove rear door panel so that i can replace factory speaker on a 2004 trailblazer. Also what size speaker will replace it. On the inside trim, you can remove screws that are by the door handle, arm ...

...door module (control cluster as you say). Below are 3 pictures for you. The first one is the location where the fuse box is located for that fuse (under drivers seat in the rear). The second picture ...

...Remove the rear door trim panel; refer to Section 501-05 . Remove the rear door radio speaker. Remove the four radio speaker screws. Disconnect the electrical connector. Remove the rear door radio ...

...Remove outside rear view mirror (17682) while guiding wiring and connector through hole in door. ItemPart NumberDescription 1 17682 Outside Rear View Mirror 2 N621906-S36 Nut (3 Req'd) 3 F8DB-17D699- ...

...remove the rear window console panel ( spring clips on the side towards the cab, tabs on the side towards the door ). Behind this should be a bolt. Next remove the rectangle cover in teh door handle ...

...rear door speaker grille is damaged. I have a replacement, how do I switch them? Do I need to remove the entire door panel? remove panel for access. use panel removing tool (cheap) will save ...

...mirror electrical connector. Remove the outside rear view mirror. Remove the nuts. Remove the outside rear view mirror. Feed the outside rear view mirror wiring through the opening in the front

rear portion of the front door inside handle escutcheon and the front door trim panel (23942). Remove the three cover caps and front door trim panel screws. Remove the one front door trim panel capped

...Remove the rear door trim panel. For additional information, refer to Section 501-05 . Remove the rear door radio speaker (18808). Remove the screws. Disconnect the electrical connector. Remove the ...

...remove rear speaker covers in a 96 geo prizim.. to replace speakers are they fitted in the rear doors or the parcel shelf ,if there aree no visable screws to un do if door fitted then will have to ...