1998 Chevrolet S-10 Pickup "remove top bolt alternator 1999" Questions

Ad

Question about Chevrolet S 10

1 Answer

...Remove the alternator from the vehicle. To install: Position the alternator in the vehicle and loosely install the retaining bolts. On 1994-98 models, tighten the top alternator bolt to 22 ft. lbs. ...

Ad

Question about Chevrolet S 10

1 Answer

...Remove alternator. To Install: Place alternator on engine. Install (but do not tighten) pivot bolt. Rotate bracket down on top of alternator. Install belt tensioner and install bolt loosely. Install ...

Ad

Question about Chevrolet S 10

1 Answer

...remove the top bolt the tensioner can be removed by sliding it towards the rear of the car through the slot it sits in. The bottom bolt has fallen prey to what I consider an engineering oversite. The ...

belt tension. then remove the bottom alternator bolt. pull alternator up to top of radiator.may need to remove upper radiator hose and cooling fan assembly to get enough room to get the alternator out

...Once the alternator is disconnected from the engine remove the low side A/C line from the A/C compressor and the alternator will come out through the top. It will be tight but it will come ...

...Remove the bolt holding the top of the Alternator Mounting Bracket to the Engine Air Intake. 4. Remove the bolts (plural) holding the outside of the Alternator Mounting Bracket to the Alternator ...

Question about Chevrolet S 10

2 Answers

...Remove the top alternator support bolt.8.  Losen the bottom alternator support bolt.  It will not come out. The supportbracket is a slot, not hole.  The alternator bolt and all will ...

...bolt in the top or just ride againest engine There is a bolt that will go through the unit. There is a spacer missing - it is about this long ----------- < Look around the engine behind where the ...

remove the plastic under tray on the drivers side,from underneath, undo the main alternator bolt,just enough to move the alternator, now from the top undo the belt tension adjustment locking bolt,then

...4wd chevy tracker 2.0 l Do I need to remove power steering pump? If it's like the S-10 Blazer you don't. It's top mounted to the right of the battery and is four bolts a BFH or pry bar and it's

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

2,062 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...