98 chevy s10 zr2 not disengage from 4lo to 2hi? we changed the vacuum switch. no vacuum put the old vacuum switch back on.had vacuum. actuator doesnt work now.it did before i put new vacuum switch on.
...98 chevy s10 zr2 and we changed the fuel pump and aint gettin no power to the fuel pump checked the fuses and relay under the hood no power and the gauges inside are not working other than lightin ...
98 chevy s10 p/u 2.2l 4cyl. standard When headlights are on and you turn the left turn signal it flashes rapidly, front and back. I also noticed the right rear white squre reverse bulb also flashes. ...
...98 s10 is stuck in 4 wheel drive low. i started the truck up and the switch went into 4 wheel drive high by itslef then was flashing and went into low. well i couldnt drive it like this so i pulled ...
Question about Chevrolet S 10
...S10 2.2L 4Cyl extreme.. I can not find or locate the EGR Valve any where,I am pretty sure it does not have one but wanted to confirm with some other fellow fixians if any one knows for sure.. I even ...
98 chevy blazer won't shift into 4wd. We I push the auto 4WD or 4HI the light will blink and then it kicks back over into 2WD. Had the same problem, disconnected the battery for about fifteen minutes,
98 S10 blazer LS 2WD 4.3 My headlights always work at night(thanks to the sensor in the dash)so I never use the headlamp switch, well awhile ago I noticed the dash lights don't come on when the ...
...S10 model) - No Electric Truck was running fine on a Sunday. Didn't try to start it until Tuesday - Nothing.... I mean NOTHING! Battery is good (tested). No dashlights, no door open "ding". Will not ...
...98 S10 with the same engine. If you unhooked the fuel line so you are losing pressure from the line back to the pump then I would say your pump is letting fuel back to the tank when it shuts off. My ...
2,062 questions posted
Usually answered in minutes!
904 Questions
790 Questions
747 Questions
686 Questions
620 Questions
