1998 Chevrolet Malibu "check egr position sensor" Questions

...EGR system. If the Check Engine light does not come on during the road test, Connect a code reader and check the OBD readiness monitors. If the EGR monitor says "complete" and there are no codes in ...

...EGR sensor. Check for a good 5 Volt reference voltage to the connector. If it doesn't show a reference voltage, repair an open or short in the 5 Volt reference circuit. If there is a 5 volt ...

...EGR valve, same start stall. no problem starting after full opertatng temp. what next? Check your IAC motor (Idle Air Control) It could be sticking open. Ps. Might be called Idle Speed Control motor ...

acclerator runs high and heat goes up check throttle position sensor also egr tube for holes

...egr valve Is the check engine light on? Do you have a scanner? Trouble codes are a good place to start. Could be a Mass Air Flow sensor, Idle Air Control Valve, or a Throttle Position Sensor, or even ...

...EGR) valve pintle position input to ensure that the valve responds properly to commands from the PCM. The linear EGR valve is controlled by using an ignition positive driver and ground circuit within ...

...it will die if I dont keep my foot on the gas. I would go to Autozone and ask them to check your computer for trouble codes. I would expect a Throttle Position Sensor, or EGR code to be

...you find this information useful! If check engine light is on you may have a throttle position sensor,egr valve problem or something similar. If light is on have codes read at your local parts

...egr vacuum solenoid? What is my next option? I have a week until my tags are due so I'm kinda pressed for time. Thanks Hi there I am technology tech mechanic I work on electric and man. I come from ...

...the amount of fuel and adjust the fuel mixture. Also check the convertor, as if plugged can make work really hard e major issues if you keep driving. Also check your EGR it could be sticking ...