1996 Volkswagen Jetta "fork springs" Questions

...has broke ,either way its a new clutch unless you have broken clutch cable BROKE RELEASE BEARING OR FORK OR AIR IN SYSTEM.CHECK CLUTCH MASTER CYLINDER BRAKE FLUID LEVEL IF LOW CHECK FOR LEAKS AT ...

...fork on the gearbox end that can be broken to get to it u need to remove the round cover on the end of gearbox to inspect.if not it then gearbox must be removed and then the plate where the push rod ...

throw out barring fork doesnot allignment with clutch slave fork too short Did it pop out of position or what? Or was this after you replaced the clutch or what? Well on clutch forks ive seen. There ...

...it stays stuck down and u can feel it grinding thru the pedal? What is wrong please? its clutch fork is not reversing check if its fork spring is missing.clutch bearing keep moving with clutch.

I just install an different engine in a 1999 3.2L Rodeo. the fork for the throw out bearing is hitting the pressure plate when the clutch in depress any help? Sorry to tell you this-but you do not ...

93 stealth clutch goes to floor pulled slave cylinder felt good but trani fork has lots of play does it need adjustment loose unattached spring or something else No ---it simply needs the air being ...

need to change shift fork, i pulled the tranny out of my 88 toyota 4x4 r22 engine 5 speed, but i need to change the shift fork for fourth gear and i was wondering, seeing as how you cant work on it ...

Mongoose exile 26 inch front shock adjustment Can it be done? This depends on what forks are fitted. Adjustment is usually done on the top of each leg. Look at the very top of each leg. if it is a ...

...Transfer case problem or front end? It is in the tranfer case, and is most likely a broken mode fork spring or bent mode

...springs seem to lose all there spring preasure so the fork and throwout bearing have no spring give?why Did you tighten the pressure plate down evenly. If so then does the car have a hydrolic ...