Question about Oldsmobile Silhouette
...blown head gasket it keeps over heating we change the thermostat, check the water pump and still can not find a reason. when we put coolet in it would back up into the resivior and when you pull the ...
Question about Oldsmobile Silhouette
...blown head gasket ,warped head ,blown intake gasket===losing fluid look for leak ---bad hose ,radiator leak,water pump leak====water pump bad ====cooling fans not working ,these are some of the most ...
Question about Oldsmobile Silhouette
...blown....Sorry i wpild sat head gasket......Let me ask you when the gaskets was changed did you have the head checked and did you have head bolts replaced?? Head if not cracked my need ...
...previous blown head gasket in cooling system they do make a supper strong cooling system cleaner for that type of stuff its made by prestone and works really good you might have to use it a few
...blown head gasket. is that true could be, but you can verify. First make sure there is no air bubble in your cooling system. Recommend you park on an incline, remove the radiator cap, start the car ...
...head 2. Blown head or intake gasket 3. Cracked block. The gaskets are an easy and relatively cheap fix, the head replacemnet isn't to difficult but will run you more than the gaskets. If the block is ...
Question about Oldsmobile Silhouette
...blown head gaskets on a 02 oldsmobile silhouette? more of a mechanics job. Going internal on this job and very easy to mess something up. But if you want to try it, you have to remove everything from ...
Question about Oldsmobile Silhouette
...to check the water the radiator cap is cold until you try and an loosen it its steams very hot and that's when it gets hot. What can this be? Sounds like a cracked head or blown head ...
blown out. Somehow the threads in the cylinder head have been damaged. The plug has come loose and been forced out by the compression gases formed during combustion. This is not typical wear and tear.
...head gasket was blown, replaced head gasket, now it has a funny noice to the motor. There was no oil getting to the top of the motor when I pulled the valve cover. what could the problem be??? if its ...
620 questions posted
Usually answered in minutes!
601 Questions
394 Questions
322 Questions
268 Questions
211 Questions