2001 Mitsubishi Galant "truck engine valve" Questions

...camera for any valve damage. A new belt can be fitted, and the engine turned over to test compression. If there are problems spotted, then the head has to come off and the the damaged valves

...possible, but the odds are high some valve damage will occur. If the engine is running at highway speed and the belt breaks, odds are some of the valves will hit the pistons before the engine

...YOU HAVE LOW COMPRESSION ENGINE BURNING OIL.YOU HAVE WORN VALVE GUIDES ALSO VALVE SEALS AND WORN PISTON RINGS. Engine put out smoke when started on a freezing morning. Is long term engine damage

...galant sei the valve followers in this engine are hydraulic and have no lash setting. if u have a noise u may have a defective cam follower, which is also called a lifter in OHV engines, yours is

bend valves broken timing belt will bend valves on interference type engines. Usually a valve job with all new valves will fix if pistons are not damaged. Job might not be worth car if its old.

...engine oil and depressed the plunger on the valve lash adjusters to cause them to fill with oil. If you can still depress the adjusted after it is filled with oil then it is defective. By the way, ...

need to know original 4g37 engine 1.8 galant 1988 tappet valve clearance intake .006 exhaust .010 jet valve "if applicable" .010 note:adjust when engine is hot

Why is there no compression in engine on my 1991 mitsubishi pajerno This has to be because of a mechanical problem in the engine. Possible sources are the timing belt is broken (one indication is the ...

service engine soon light came on first make sure egr valve works.with engine running aply vacum to valve, if idle drops,valve is ok.if not you may have a bad valve or possible carboned up egr passage

...valve or if I have to replace the engine? It depends on how much damage the valves did or didn't do to the pistons when they hit and bent. At the very least you're looking at a cylinder head rebuild ...