2001 Mitsubishi Galant "reset crankshaft sensor" Questions

crankshaft position sensor the camshaft position sensor is located behind the harmonice balancer remove balancer and timing cover once removed you will see it u will also have to remove the crank gear

...reset button, so once again check to see if you have this button. If you change all of these and the pump still doesn't work, you may have a bad fuel pump. Test and make sure the pump is getting ...

...the crankshaft to reset. I was told that there is a crankshaft sensor on the vehicle and I am trying to find out where it is located. I am just trying to locate the crankshaft sensor at this

Sensor. Now truck is hard to start and is putting out the 4 new DTC codes. Do I need to reset the computer or something? you need a proper scan tool and do a crankshaft camshaft corellation allignment

...crankshaft. If it is running fine. Have the code reset and see if it comes up again. The code came up because the ccomputer noticed that the sensor missed a pulse. If you reset it and it stays off, ...

...TOOL HAVE TO BE USED SO THE VARIATION LEARN PROCEDURE CAN BE PERFORMED.IF YOU TRY TO REPLACE THE CRANKSHAFT SENSOR DONT RESET VARIATION CAR WILL NOT START.PCM WONT FIRE NEW SENSOR NOT IN THE

...wiring is good and connection is clean then replace the crank sensor and reset the code, this is the first step, the computer could be a problem also but most times its the crankshaft sensor. good ...

...THE PROB any time crankshaft pulley or crankshaft or engine remove the crankshaft position sensor has to be relearned or reset using GM TECH 2 SCANNER.if not engine wont start or have misfire

...crankshaft position sensor wiring, then withdraw the sensor. To install: Install the sensor and secure with the bolt to 69 inch lbs. (8 Nm). Attach the engine wiring. Install the right hand fender ...

crankshaft sensor i repleced the crankshaft sensor on my 02 altima because of this code p0335 and after replacement it came up with a new code after reseting the computer, code p0725 what can i do ...