2001 Mitsubishi Galant "remove water pump 2002" Questions

Ad

How to remove water pump pulley on 2002 Mitsubishi galant 2.4 It is held on by four bolts, remove them and tap the pulley to break the rust bond.

Ad

Question about Mitsubishi Galant

1 Answer

...Remove the water pump, gasket and O-ring where the water inlet pipe joins the pump. To install: Thoroughly clean both gasket surfaces of the water pump and block. Install a new O-ring into the groove ...

Ad

...water pump before its installed. 2 hours labour. Removing the old engine takes about 3 hours labour. Installing the new one takes about 4 hours. You should replace radiator hoses and clamps. If the ...

Question about Mitsubishi Galant

1 Answer

...Remove the valve cover and look for excessive clearance on the valves. If things are not right up top you will have to run a compression test or dig down to the bottom and check the timing marks. If ...

Question about Mitsubishi Galant

1 Answer

...Remove the water pump pulley. Remove the idler pulley. Remove the auto tensioner. Remove the lower timing belt cover. Turn the crankshaft clockwise and align each timing mark to set the number one ...

Question about Mitsubishi Galant

2 Answers

...remove it. * Suspend the thermostat completely submerged in a small container of water so it does not touch the bottom. * Place a thermometer in the water so it does not touch the container and only ...

Question about Mitsubishi Galant

1 Answer

...water pump, hoses, sensors, and thermostat have all been checked and is still doing the same thing. This sounds like an issue with your radiator fan not kicking in. You might have a bad fan relay ... ...

...Remove the water pump pulley bolts. Remove the water pump pulley. [img src="http://i.fixya.net/uploads/images/techmecho_1.gif" alt="techmecho_1.gif"> Remove the water pump bolts. Remove the water ...

Question about Mitsubishi Galant

1 Answer

...water pump pulley. Remove the bolt and the nut and position the roll restrictor bracket out of the way. Remove the accessory drive belt. Remove the generator. Remove the bolt and the accessory drive ...

...belt is off, how much more is involved to change the water pump, this is the root problem. Hi: Once you get the timing belt removed, the water pump is relatively easy to remove. It has approx 5

Not finding what you are looking for?
2001 Mitsubishi Galant Logo

1,076 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...