2001 Mitsubishi Galant "remove back seat" Questions

...remove the back seat to change the struts on a 2002 galant? There are 2 pull tabs about 8 inches inward from the seat bottom ,pull out to release bottom,then remove 3 ,12mm bolts that hold the seat ...

...remove the back seat. Bottom first then top. There's two clips under the seat u pull them and the bottom comes off. Then there's 4 bolts holding the seat in. Now the carpets tricky because its under ...

...remove back seat you will see the fuel pump access panel ensure your battery is disconnected,remove the four fastening screws,disconnect connectors remove pump you will see the filter underneath the ...

...remove the rear bench seat on a Galant 2010 to install seat covers? Thanks Rear bench seat with nondetachable head rests and a fold down arm rest. push back firmly at front of seat at bottomlocating ...

...the front seat, move all the way forward to remove the bolts at the rear of the rails and then slide it back to get the front ones removed.... Sorry I couldn't help any other way....Regards ...

...rear struts on my 1996 galant[mitsubishi].do i have to remove the back seat? Check this link & scroll down to 1994-2000 models. ...

...back and I was able to find leather seats that were in a 93-99 model and they fit in my 01. I just bought another 01 galant and I was wondering if leather seats from a 2004 model would fit in 2001 ...

...back seat and can remove the access panel but beyond that I am stuck,Thank you easy as pie: gain acces to pump assy remove hose (mark where they go) unscrew lock flange remove and reverse to install ...

...4cyl 2.4 liter engine 16valve overhead 1993 mitsubishi galant the fuel pump is in the gas tank and there maybe an access port under the back seat if not you have to remove the tank from under the ...

...back you know where they go. When you get to the valve cover remove the bolts, gently tap on the side of the cover with a rubber hammer to loosen up. Once you have it off remove old gasket and clean ...