2001 Mitsubishi Galant "intake manifold" Questions

...intake manifold. Also check for leaky intake manifold gaskets. Do It Yourself Diagnosis and Repair Remove and clean the idle air control valve if your car has one. I prefer Seafoam Use seafoam spray ...

...INTAKE MANIFOLD DO The intake manifold draws air into the engine where it meets the fuel injectors. It must have an air tight seal (meaning all attaching components be firmly in place) in order for ...

...intake manifold and vacuum hose. Bad Idle Air Control Motor (IAC) Low compression (170 psi + is OK) Start cleaning and repair these trouble spots and see is there any improvement. ==== For more ...

...Check all the hoses. If none are sucking air then use WD40 and spray around the intake manifold. If the engine runs better or changes how it runs then look at replacing the intake manifold

...the intake manifold to replace rear spark plugs for a 2001 galant mitsubishi v6 you shouldnt have to remove the manifold. you can access those plugs by removing the front tire and go in that

i just replaced the intake manifold on my 2001 galant now it idles very high i dont know why intake gasket leak. check for leaks on the gaskets or broken vacuum hoses

...aren't bolts they are plugs and shouldn't be removed. if your pulling the head with the intake manifold attached, make sure you removed the bolts from the support bracket under the intake

...one brand but a back street cowboy who works on anything and the secret here is to look first and follow all the pipes to see where it is egr valve located on intake manifold below the throttle

...intake manifold Think of it as yesterdays carburater Follow the plastic intake ducting from air filter to the throttle body DO NOT install ANY PARTS based on ANY CODES It doesn't work like that Codes ...

trim" refers to the volume air flow sensor, fuel injector, fuel pressure, engine coolant senor, air intake sensor, barometric pressure sensor, oxygen sensor, intake air leaks, or cracks in the exhaust