2000 Mitsubishi Montero Sport "change fuel filter" Questions

...starting from stop Have you done a tune up on the car? Change the spark plugs, check and change the intake filter and fuel filter, and add some fuel additive to restore the power back to the

change fuel filter Locate it by following the fuel line from intake manifold. If it is an injection car the filter should be a metal can with an input, and a output with goes to the intake manifold ..

...cylinder in it, that is your fuel filter. a couple of clamps and you can change that thing out in a matter of minutes, and depending on your medel you may have to remove a metal plate to get to

...fuel filter changed, timing belt changed ( kit including pump) intake cleaned out, spark plugs and leads depending on year if has leads fitted. oil changed (filter as well, some people for get this ) ...

...fine,but once gets to the normal temperature goes down RPM and starts shacking and the dies. Have they changed the fuel filter? What is the pressure in the fuel lines it should be between 30 and 40 ...

is a fuel issue. You might need to change the fuel filter. It may be clogged. Make sure none of your fuel lines are pinched also. It could be a weak fuel pump. It could also be a leaking fuel injector

...filter and changed that...no more codes...still won't start. Yes I did the 13 page troubleshoot. All connections are good. Coils, MIP, fuel pump relays good, all wire traces are good, resistance ...

...change your fuel filter and you should be good to go (change your plug wires one at a time so you dont get confused with the proper firing order, if you install them in the wrong order the vehicle ...

...fuel pump and filter. this is very dangerous especially if going fast or downhill because I lose my power steering and brake. puedes tener el reten de la cabeza de la bomba inyectora endurecido y por ...

...be getting water in it and causing this problem? Change the fuel filter. If that doesn't do it then focus on the ignition components. See if there is a code in the computer, clear it and re-read