1998 Mitsubishi Montero Sport "removing exhaust" Questions

Where are the four O2 sensors on a 2003 Montero Sport? Is $300 reasonable to replace the two upstream sensors? According to the service literature I read, the 2003 Montero Sport with the 3.0 or 3.5 L ...

...exhaust manifolds crack on my 1999 Montero Sport. It's relatively common from what I've told and have read. Check to make sure you don't have a cracked manifold by removing the heat shield on each ...

P0401 check engine light. last year replace the egr solenoid. now the light cuts back on for p0401. i have replace the egr valve and the vacuum control valve. drove it for readiness and the lights cut

Need to replace engine (rod went through engine when it blew) on 1998 Mitsibushi Montero Sport 6 cyl 2WD. Are there any engines compatible with later models or do we need to look strictly for 1 1998 ...

My starter has gone out and it is parked in a fire zone at the grocery store. My Mother was using it at the time. I need to know what it looks like and how to replace it. I am an unemployed full-time ...

gdi 3500 pajero not giving me enough power and throttle when i drive it in the morning everything was perfect , the power etc. but after an hour long drive....the car start to throttle it's like ...

2001 Montero Sport, 3.0, 4X4: New water pump and thermostat (170 deg). When accelerating from a stop, a (flowing) noise is heard: It is almost a 'trickling' sound, like the sound you hear in a

Battery chaged and car DOES NOT idle I have a mitsubishi montero sport 2001 and I just changed the battery. It stars but will not idle and will shut off after 1-2 seconds from turning it one. Please ...

The Service Engine Soon light is on while driving. Kindly advise what sensors are to be checked / replaced on my vehicle. The "Service engine soon" light is activated by either one or two air/oxygen ...

...exhaust leak the hole allows the mixture that the secondary o2 reads to become high and will cause check engine light to come on. Fix the leak and reset the ecu by removing the negative bat terminal ...