...wiper motor running but the blades do not move then the linkage grommet that connects the two wiper arms to the motor needs to be replaced. If you don't hear the motor running it could be a loose ...
...wiper blades by means of where it hooked to the motor, if not this has seized up. I had this happen to my 1990 Montero I replaced it with a used unit for @ $85.00 Just take it as a process of ...
wiper blades are not working ive checked the fuse its ok.u can hear the wiper motors stroke inside the car when u switch blades on but they do not move,i tkink it could b the linkage between motor and
Cadillac Deville 99 Thw windscreen wiper just stopped working, the fuse is ok. No water is pumped either. Wiper/Washer System (Pulse) Schematics (w/o CE1) Wiper/Washer System (Pulse) Schematics (w/CE1
...start troubleshooting and repair this issue? check the rear wiper fuse in the fuse box or check the motor is connected correctly to the plug or check the motor earthing is well tightened to the ...
...wiper blades stopped working the other day. Is it a fuse? Or how can i get them back to normal? Probably a fuse. fuses are located in a removal panel built into the molding/dash of your car and under ...
fuses, then check the wire connections at the wiper motor. motor or lankage Same problem but cant find the location of the relay. Found the fuse to the wipers and it was ok. I checked the manual and a
Question about Ford Cars & Trucks
...connected to a rain sensor, could this be the problem? The other wiper selections are ok Check fuses for it and the relay it could be the sensor but check the cheapest first also the wiper multi ...
Question about Mitsubishi Montero Sport
...fuses and if the fuse is good it could be the motor , It is not hard to replace .Pull the wiper arms and the three bolts that hold the motor in drop it out and replace it , put the wiper arms back on ...
Question about Mitsubishi Montero Sport
my 2016 ford expedition rear wiper blade will not work. where the blade connectes it is set up Check the fuse also see if you here it cycling when it's on the bushing could be torn inside that grips ...
434 questions posted
Usually answered in minutes!
593 Questions
427 Questions
124 Questions
6 Questions
380 Questions