...wires from the distributor cap, down to the block. This yahoo write up will help. If you have direct ignition (coil packs) then you will be looking for small blocks above each spark plug. Look for ...
Question about Mitsubishi Montero Sport
...wires, distributor cap, and rotor. Error code went away for one day and came right back with the same error code of P0305. Any suggestions? You say you changed the cap and rotor so I'm assuming the ...
...plugs 2)do a oil change 3)spark plug wires 3)distributor cap and rotor note misfire can be cause by: 1.bad gas 2.spark plug and/or wire 3.distributor cap and/or rotor 4.valve adjustment 5.injector ...
plugs which were really bad and wires,rotor and dist cap. I checked for spark from the coil wire which seemed strong. However there is no spark at the plug. I check the resistence at the pickup sensor
Question about Cars & Trucks
ram 1500 5.2 liter i changed plugs,wires and intake manifold gaskets. It's still missing but it comes and goes now. Anybody have any ideas what to try? Injector? Injector/wiring? Distributor cap/rotor
plugs,new wires ,and cap and it has good spark so moved the injector to see if that was it but no go still miss fire on #3 car has 210000km o and looks like it is smoking a bit but its white smoke but
Question about Mitsubishi Montero Sport
...on changing spark plugs on a 98 Sebring Convert 2.5. Looking for best way to access etc... take off the upper plemnum while you in there change the wires cap and rotor for the distributor as
...plugs in wires still doing it if its a cap and rotor distributor replace them. If its coil packs then you could also pull your spark plug wires (mark where they go), place a spark plug in one, ...
...plugs in wires in it is still doing it id looking in to changeing the dis cap in rotor bug in the dist or you mite have bad gas in it The 98 z24 has no plug wires or distributor/rotor button hard to ...
Question about Mitsubishi Montero Sport
...cap. I was able to get a distributor off a 1998 Honda civic ex. The 91 wiring harness was 2 plugs and the 98 was 1 plug. I was able to splice the 91 harness on the 98 distributor. I was told by a ...
434 questions posted
Usually answered in minutes!
593 Questions
427 Questions
124 Questions
6 Questions
380 Questions