2002 Mazda Tribute "side thermostat block" Questions

...side of the engine ( on engine below thermostat housing bolted to engine block) once i removed it i noticed the tip of the sensor was broken, yes, broken. so I knew i found the problem. I put a new ...

...side of the thermostat supposed to face toward the engine block or away from the engine block? Also, does the gasket go between the engine block and the thermostat or on the other side of the ...

THERMOSTAT.DONT NEED GASKET. IF YOUR VECHICLE HAS PAPER TYPE GASKET.PUT A SEALER ON BOTH SIDES OF GASKET.THE GASKET ATTACHED TO HOUSING THEN TO ENGINE BLOCK. Hi, does not matter which side ( housing /

...replacing the thermostat, the spring side goes into the block! 2.0L and 2.4L it is under where the upper rad hose hooks to the engine. 2.5L it is under where the lower rad hose hooks to the

...thermostat? In to the block or out to the hose? The spring side noramly goes down to the block side. It is senceing the block tempature not the radiator tempature becase that changes to cool the ...

; ) In volkswagon jetta, the thermostat contains two sides. one is flat side and the other is extended side. and the thermostat is located in such a way that the extended side goes in the engine block

...big for the thermostat to sit inside. Do I need any other parts? On the 6-cyl 3.4L, it's under the throttle body. Just follow the large hose from the top left side (driver's side) back to the

...side on the bock or block way on the hoses the thermostat spring part goes down position in the engine the spring part thermostat need to be in coolant so when spring get hot it draws up to open ...

...was nothing there! Where do I find this Thermostat on a Chrysler 300m. The thermostat is in the block on the drivers side behind the thermostat housing. Follow the lower radiator hose to the

...thermostat. It's on the passenger side of the engine and has a plug leading into it. 2 Unplug the thermostat housing from the engine block using the 3/8-inch ratchet and socket set. The housing ...