...System Location: Transponder At Ignition Switch Tumbler if you require further assistance please let me know and i will help assist you from there. Thanks, Midwest-Tek if its a factory alarm you ...
must be in the run position prior to removal of the ignition switch or damage to the components can occur. Reprogram the theft deterrent system. Refer to Programming Theft Deterrent System Components
Question about Cadillac Cars & Trucks
...system functions are provided by the theft deterrent control module. When an ignition key is inserted into the ignition lock cylinder and the ignition is switched ON, the transponder embedded in the ...
ignition lock cylinder from a 2003 Saturn Vue for rekeying? REMOVAL Disable SIR system. (Refer to "SIR Disable/Enable Procedure (For Frontal and Curtain Inflators)". Disconnect negative battery cable.
Question about Pontiac Cars & Trucks
...by vin at a dealer --removing ignition in an attempt to hotwire or bypass security system is and was the wrong thing to do you just disabled the vehicle [ no bypass or disabling system by the way
Question about Buick Cars & Trucks
...ignition lock ccylinde on a 2002 buick lasaber Removal Procedure Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could ...
...system functions are provided by the theft deterrent control module. When an ignition key is inserted into the ignition lock cylinder and the ignition is switched ON, the transponder embedded in the ...
...system Remove the tilt lever if equipped Remove the upper and lower steering column coversIgnition Switch Remove the ignition switch retaining screws Detach the ignition switch from the steering ...
ignition switch for 1998 gmc pickup >>>>FIRST disable the air bag system You'll need to remove the upper and lower steering column covers. Also all the trim under the drivers side, kneee bolster, etc.
ignition switch removal and repair for 1995 crown victoria Disable air bag system. Remove steering column shroud by removing self-tapping screws. Remove tilt lever if equipped. Remove instrument panel
720 questions posted
Usually answered in minutes!
221 Questions
49 Questions
4 Questions
1 Questions