1997 BMW 318 "torque settings head" Questions

...torque settings bmw 318i m43 Hi dear40, The m43 engine should be similar to both the m42 and m44. The cylinder head torque settings are 22ft/lb and 90degree torque angle, and another 90 degree torque ...

Torque Settings on a 1994 BMW 318i? when a new engine is put in the car,then ypu have to set the torque settings where in this case i do not know how to set the torque settings The torque settings is ...

...torque settings on my bmw e36 316i 1991 j reg its not a 318i but parts of a 318i would thay fit a 316i and work fine Hi unsure what you mean by change the torque settings, if you mean on the head ...

...head Hi I'm looking for cylinder head torque settings for 316/318 BMW 1992 E36. I've just removed the head to repair a valve seater. so i need to put it back 30nm 90 degrees, 90 degrees Renew

torque settings for the head bolts. Thankyou Hi, I guess this is an E36. Head bolts should be renewed if heads been off, as they are stretch bolts. Tightened in 3 stages, 1st 30-35 nm 2nd + 90 degrees

...TORQUE SETTINGS BMW 318TI THANKS hi this has to be done in 3 stages, leaving 20 to 30 minutes between tightening's they are as follows.. stage 1: 30Nm leave 30 minutes stage 2: 90 degrees turn leave ...

can you tell me what the torque settings are for inlet manifold to head on 1999 e46 bmw 318i. its the m43 engine .many thanks if the treads are m8 then 22 nm,m7 15 nm,

...torque+settings Torque setting for Ford Courier F8 motor from main bearing Fixya https://www.fixya.com > Forum > Cars & Trucks > Ford 10 hours ago - Main Bearings Torque specs. 40-43 Ft. Lbs. ...

...torque settings for the engine ie head bolts v6 engine 1 i need torque settings for the engine ie head bolts etc i am replacing the heads on a GMC 350 cu in engine.  what is the final torque of ...

...Torque settings Big End Torque and Main Bearing Torque settings please? Question edited for clarity. In the link ...