1997 BMW 318 "engine miss 40 mph" Questions

...40 MPH. I DROVE IT HOME BY COASTING MOST OF THE TRIP. THE SAME THING OCCURED LAST SUNDAY IN SACREMENTO. I STARTED IT AND RAN ROUGH SO I SHUT DOWN, WAITED, STARTED AGAIN THE ENGINE AND WITHIN TWO ...

...accelerating over 40 mph Engine hesitates and almost misses when accelerating over 40 mph. gas mileage has also tanked. Burn ignition coil get the car pass on a scanner im sure you get a misfire ...

...idea what that might be? are you sure it is a miss and not a shutter or transmission kicking in and out?possible cause could be tps sensor losing signal at this spot is check engine light coming

...40-50 MPH and at 70 mph does the same sound. If you accelerate and back off the go again it sounds like the transmission is clunking but the transmission guy said it wasn't the transmission. HELP!!! ...

...miss for a couple months! Now, the same problem again. It misses going straight down the road, and also pulling inclines. I'm at my wits end. What can I do? There are no codes! engine light isn't on. ...

...30 and 40 mph replaced plugs and O2 sensor, no change. Car has 80K miles. Most noticeable in 3rd & 4th gear. If the engine has a miss or power loss, the check engine light should be on.Is it

miss firing one it reached running temp. the problem vanished so check your coils. i have a 2000 ls 6 cylender....replaces the head gaskets, all coils and plugs runs great......my car used to buck and

...of gas is very obvious and may slightly back fire. Could this be caused by misfiring? I would say the miss is due to excessive fuel, not excessive fuel due to the miss. Is the check engine light on

miss at about 40 to 50 mph Hi I have a 96 s10 4x4 I get a mis at about 40 to 50 mph if I kick it down a bit it runs fine and then leave off it usually fixes the problem other then that it runs fine I ...

...engine light will stay off untill i go above 40 mph then the light comes on and tcs light flash car starts to miss and lose power but doesnt shut off it runs fine untill 40 mph need help please P0340 ...