1999 Oldsmobile Aurora "need bushings driver side door" Questions

Ad

Question about Oldsmobile Aurora

1 Answer

...Need to be able to get into my car from the driver side---help-! your linkage rod to the outside door handle has disconnected , if you open up the door panel to access the lock linkage rods you will ...

Ad

Question about Oldsmobile Aurora

1 Answer

...bushings. I use a floor jack and a 4x4 block of wood to support the door. you will need a spring compressor to remove the door "hold" spring. Once you have that removed, you can use a brass drift or ...

Ad

...new handle, but handle broke because of bad hendge bushings making door hard to open, driver side ususlly first to brake then passenger door a year later. need body shop to replace door ...

Question about Oldsmobile Aurora

1 Answer

...bushings and pins that need replaced. you will need a floor jack to hold the door up while you replace them. Knock the pins out, the pull the door back and remove the bushings. install in reverse ...

Question about Oldsmobile Aurora

1 Answer

...window leaks at top moulding. Can door be adjusted to compensate for sagging door? it sounds like you need to replace the door bushings. thier only abot a couple bucks and a afternoon hopes this ...

bushings need to be replaced i need to replace both and there is a spring in the way Remove your doors and replace your bushings. You will have to manually replace the spring after you install the new

...need to pick it up to close it. there should be heavy copper / bronze sereated bushings that are tapped into the door hinges. there where the door hangs/pivots on the hinges there are large pins ...

Question about Oldsmobile Aurora

4 Answers

...bushings that may need replaced? WEll, usually not a bushing, but there is often lots of wear at the pivot pin. Usually best to replace entire hinge, as teh tolerance goes off when the pin wears... I ...

Question about Oldsmobile Aurora

2 Answers

...need new hinges on door and body of vehicle, if so it is about 600 -700 to replace , may be able to get new bushing and pins , without replacing hinges If door hinge has removeable pins and bushings ...

Question about GMC Cars & Trucks

1 Answer

need help holding the door to change the bushings and you only change one at a time. Their easy to change once you see how they come out, make sure the door is stabilized by someone and pull the pin (

Not finding what you are looking for?
1999 Oldsmobile Aurora Logo

529 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...