2003 Nissan Altima "fitting hands free kit" Questions

fitting a hands free Vodafone are having problems fitting a hands free kit into a Nissan Almera '53 plate car. AFAIK this is a standard type B radio. Vodafone state that the wiring loom is "different"

...just got a hands free kit fitted but has been stuck at the garage and the car wont start well if they have flattened his battery playing around with car then its up teh garage to jump start it for ...

...hands free phone kit, now the climate control pannel is dead. no power no lights nothing? It sounds like one of 2 things happened: 1. You blew a fuse, be sure to check the fuse panel 2. You knocked ...

hands free kit and then replace the radio. Any ideas how i remove/return the radio? thanks muchly take the woodgrain cover off around shifter, it pops off. next pull out the small panel just below the

hands free kit has the speaker in the front passenger's well. The aerial is on the top of the rear window.Underneath the phone is a tilting cradle for the phone. The wiring goes underneath the armrest

...fitting that fits, tighten it hand tight attach the hoses to the fittings and place the other end of the hoses in the master below the fluid line ,take a phillips screwdriver and pump the plunger on ...

free. DO NOT USE A COMPRESSION FITTING ON THE LINE THERE AN NOT LEGAL AND WILL NOT WORK Y ou have to do one flare on the line that you need to cut .If you don't under stand something let me know and i

...free of corrosion look for terminals that look black or have broken off the connecter this is so common there is a wiring repair kit available from ford to rectify this the other problem is with the ...

...hands free kit for my phone. Can't see anything jamming the linkages, I wondering if it's a software job. Anyone got any idears? It is possible that you knocked the little turney things ( technicall ...

...fitting again... else, when they lift, the pedal will **** air back into the line. Do this several times untill you are sure all of the air is out of that line. There should be a steady flow of fluid ...