2003 Mitsubishi Outlander "computer" Questions

how to reset computer after oil change on 2008 outlander how to reset computer after oil change How to reset computer after oil change on 2008 outlander

Headlights and light inside the interior clock on dash are flickering... ok there is a few options but the best way to know is to have the computer on it tested more than likely its the computer

engine cranks over but wont start Could be a fuel, spark, ECU, { computer problem } or mecanical problem. Possible relay. If you dont have computer diagnostic skills, I would suggest you take the ...

...cranks but won't start ? If the check engine light is not on when you turn the key on, the engine computer does not have power from a fuse, or the computer has

...causing any problems? I went to two local tire shops, one said that it would cause problems with computer, the other said that 225/65 R16 was a tire with lower profile, which did not make sense ...

...problem, it indicates evidence of a problem. When this code comes on, it is to signify that the CVT computer has detected an abnormality in the ABS computer, but you will need a scan tool to test the ...

at light is flashing and wont go into overdrive the transmission computer is seeing a problem that can be dangerous, the computer will not lock up the torque converter as long as the problem is still ...

...drive or idleing the engine check light come on and it make the vehicle lose power. Your vehicle?s computer system has self-testing capability. When the computer senses that there is a problem with ...

...conector( see for phisical damage: broken, born, etc) of this sensor, the incoming voltage from computer, output signal to car´s computer. etc. this is an example. you need to know what code have ...

Engine Computer MN122009 has a blown D42. Can yoou please point me out to the correct part to be used as a replacment. mn122009 is the part number for your computer-look for that number so you wont ...