...door closed. The best way to figure out which one it is is to scan the body control module. With all the doors closed. It will tell you which door is giving the open signal. This will need to be done ...
Question about Pontiac Cars & Trucks
...scan tool Door Ajar Switch parameter while opening and closing each door. The parameter should change between Door Closed and Door Ajar. ? If the parameter does not change, refer to Passenger Door ...
Question about Mazda Tribute
...scan tool is needed to access BCM codes . Codes like these B1319 Driver Door Ajar Circuit Failure LCM REFER to Section 501-14 . B1322 Driver Door Ajar Circuit-Short to Ground DDM REFER to Section ...
Question about Mazda Tribute
...scan the door ajar waring system, the scan will indicate exactly which switch has the problem. Not the truth. If the door light/ajar switch turns off the dome light, the switch works. The dash light ...
...scan tool an view data to door module's an the BCM ? Door ajar is a fuction of the door modules an the BCM - body control module . One of these modules is seeing an input that makes it think door is ...
...Door Ajar Circuit Short to Ground GEM/CTM REFER to Section 417-02 . Inspection and Verification NOTE: The generic electronic module (GEM)/central timer module (CTM) must be reconfigured upon ...
...scan tool that is capable of determining which door it views as being ajar.Some of these models have just a door ajar switch attached to the the door latch mechanism others may require the door latch ...
Question about Ford Cars & Trucks
Door ajar switch is wired directly to the SJB. Hooking up a scan tool to check for codes would be one way to find which door switch is the problem . or watch the videos ,could just be stuck an needing
...scan the GEM module to see what door ajar switch is stuck. You can then focus you attention on that door. Option two is remove all four door panels and unplug the door ajar switch (starting on the ...
scan tool to find the offending input. The BCM (body puter ) gets the sensor inputs belowL The BCM receives the ajar switch signals on the following circuits. Circuit G75 provides left front door ajar
486 questions posted
Usually answered in minutes!
609 Questions
615 Questions
326 Questions
287 Questions
156 Questions