2001 ford 4.6 liter idles rough sometimes dies 2001 ford f-150 4.6 liter idles rough sometimes dies may need 1 0r more coil packs replaced,or it could be what happened to my 2000 4.6---1 lifter ...
97 Buick Skylark 3.1 with valve cover closest to radiator taken off when the engine is cranked only the first rocker arm moves. The one closest to the drive belt. The other ones...nothing. what is the
Question about Ford F-150
...rocker where it works on the end of the valve wears a recess that will move and then click back into place. I would use a 20w-50 grade oil and additives work at reducing friction . IF you need it to ...
...move when you turn crank shaft pulley bolt using 15 metric 1/2 socket and 1/2 wrench. reason i said timing chain my 98 chevy lumina did the same thing, first i lost oil pressure,then engine turn off ...
bad engine rattle ive recently baught a 94 saab 900 se turbo it has a bad rattle on top of the engine, the previous owner said it started instantly when driving, it has covered 170k but recently was ...
Question about Ford F-150
...rocker, or cam shaft? lots of ways. #1 is a $5 stethoscope, move all over valve cover.s. no engine size stated. in school after we find the source, we then off the cover and use a hammer backwards ...
Question about Cars & Trucks
I own a 1968 Imperial 440 V8. The intake valve push rod of the #1 cylinder bent and was causing knocking noise. I replaced it and the motor ran fine. The #1 cylinder started missing. Again it was a ...
Question about Cars & Trucks
...it gets hung at one spot. It's the one spot when the right rocker arm is supposed to move You could have a seized rocker or burnt valve causing it. busted rocker --sucked a valve -damage crank ...
...rocker arms to not move when engine starts Hi Robert: That's a scary question. If an engine can run without the rocker arms moving it must have some kind of magic. If the engine turns over but does ...
Question about Ford F-150
...rocker start to go down. Move the crank back and forth until you get the position of movement either way moves either rocker. This is called valve overlap and if you look at the timing mark on the ...
1,542 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions