1992 BMW 5 Series "trans" Questions

transmission sensor ( fail safe prog ) fail safe prog. keeps coming up whilst driving !! i was to it could be the transmission sensor faulty ??? how easy is it to replace please, if any one has ...

ok, i am not a european tech so here is the question.. i have a 1998 bmw 528-i that has a trans problem.. p0741 alreadt changed out the solinoid and changed fluid. but i think it got worse it would s ...

Gear Box is not engaging in reverse When was last trans fluid & filter change? (I'm assuming it's an auto. trans.) Trans fluid & filter should be changed every 30k or 3 years. I'd start there ...

how to reest trans fail safe mode 2005 bmw x5 3.0 litre diesel Have to have the transmission problem diagnosed Best not to use it or you may ruin the trans in as little a ten miles & may have ...

91 BMW 5251 -A4S310R- auto trans - after engine 91 BMW 5251 -A4S310R (THM-R1) auto trans - after engine warm up - 2nd to 3rd shift.... no engagement of 3rd (slips under load, freewheels on ...

Dashbord Display shows--Trans Program -See Owners Manual 1992 BMW 525i . Car is very hard to start And Dash Board Display shows trans Program --See Owners Manual. This just happended. What problem ...

my car has check engine code p1529. the speed of the car has also reduced. what could be the problem this is a trans code it maybe the speed sensor on top of trans

I have fault code EGS (054) 36 Gear monitoring 4, BMW X5 E53 3,0 D 2002 2003 X5 bmw the trans. fail safe program comes on when driving, I was told that the trans needs to clean out and put new sensors

my x5 will shift gears but wont move also it was leaking some sort of grey oil. The oil must be in full level.. Try to repair 1st the leak of trans and change the trans oil at The same time..

trans sliping code trans program The warning for the transmission program indicates an issue with the transmission. Usually it is due to mechanical problems, but sometimes it can be due to an ...