2000 Mitsubishi Galant "set timing 2" Questions

Ad

timing belt set up for galant 2 ltr 16 valve petrol ?? as this setting up is also relating tooil pump and the balance shaft set up of marks you would be best with full instructions and a diagram i can

Ad

Question about Mitsubishi Galant

1 Answer

timing setting for a 1997 MITSUBISHI LANCER 1.8 litre WAGON (AUSTRALIAN) Car does not appear in product list. Your firing order is 1-3-4-2 Your engine cylinder from the passenger to driver's side is 4

Ad

...2 to set digit 2, etc Once the code displayed is correct, push your unlock button to unlock the radio. The unlock button varies by model, but is always either AM/FM, CD, or TAPE. There is no penalty ...

...timing belt on the car it started and turned off im wondering if the engine is still good..he actually got it to start 2 times after alot of tries.he told me that maybe he was setting the time off ...

If either of these has occurred the PCM detects that the cat is no longer working as it should and sets the code/turns on the check engine light. 9 times out of 10 it is a cat that has gone bad

Question about Mitsubishi Galant

1 Answer

...2) In the proper tightening sequence (as shown above), torque bolts initially to 22 ft.lbs. (30Nm) 3) In the proper tightening sequence, now torque bolts to 45 ft.lbs. (61Nm) 4) In the proper ...

Question about Mitsubishi Galant

1 Answer

...set up to change so consider yourself lucky if you have this. If not the right setup, read on. 2. If you have 1 or 2 coils supporting more than 4 cylinders you will have plug wires running to your ...

...2- 10. Disconnect the wire harness from the headlamp switch and apply Mopar Dielectric Grease, p/n J8126688, to the harness connector terminals. 11. Reconnect the harness to the headlamp switch. 12. ...

Question about Mitsubishi Galant

1 Answer

...2.0 the timing & distributor are disturbed. 1.) What is the proper timing belt alignment (i.e. what inport or outport should be open when setting cams to crank...and where should the piston ...

Question about Mitsubishi Galant

1 Answer

...to tell you in a minute, it takes several hours to do the job, complete strip down of engine, that is just to get the old ones out, then it has to be rebuilt, and timing set, NOT a 2 minute

Not finding what you are looking for?
2000 Mitsubishi Galant Logo

1,247 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...