2002 Buick Regal "thread seat belt back seats" Questions

...seat belt is worn out and have loose thread which makes it thicker and not able to release or pull out. un do the bolts that hold the seat belt rewinder take out the back seat and then undo the bolt ...

...thread lock to the anchor bolts before reinstallation. If the seat belt tensioner has been activated, replace the front seat belt protector with a new one. Before installing the anchor bolts, make ...

...thread lock to the front seat mounting bolts before reinstallation. Make sure each connector is plugged in properly. Tighten the seat mounting bolts to the specified torque in the sequence shown. ...

for the seat belt bottom anchor point. Remove these nuts and the seat should lift up and out of the back of the vehicle. **CAUTION** These seats are ridiculously heavy so get a helper to lift them out

...thread size (8 are larger than the others)? Thanks! For my 1996 E350 15 pass Club Wagon, the Bench seats mounting brackets to floor hex head(3/4"/19m socket) bolts are: 2" Long(w/ 1 3/4" shaft), bolt ...

...i have extended the belt part with a length of old seat belt ,crude but very effective Purchase our tool to remove the threaded collar

...back up, what do I use? I dont really know what was holding the seatbelts in place. I have the bolts that went through the seat belts but what do I need for the other end? The bolts at the end of the ...

Thread the drive belt through all the pulleys except for the power steering pump (1) and the drive belt tensioner (6). Insert a 1/2 inch drive extension into the drive belt tensioner. Push down on the

...thread about the module: http://www.saturnforum.com/forum/showthread.php?t=2796&highlight=seat+belt Hope this helps! If you are in the Kansas City area, I'll help you out. SSG D - OIF III vet I ...

...I've got the back seat and trunk torn a part. Trying to thread the belt and need instructions. Thanks please explain thread the belt ,it comes as a complete unit ??if belt is in pieces get ...