2005 Chevrolet Silverado "blend door actuator" Questions

...blend door actuator (10). Blend door actuator and related components Remove the blend door actuator mounting screws from the HVAC module. Remove the blend door actuator as an assembly with the ...

...blend door changed /now works back wards!!! i changed my blend door actuatior on 01 silverado ,works but turn to cold blows hot !turn to hot blows cold!!! pulled fuse tried reset.?????? most likely ...

...blend door is stuck. try unhooking battery for a few minutes have both on heat and hook back up and start up. the actuators will run thru a learn mode and sometimes this will free up.if not you will ...

...blend door actuator. First try a recalibrations of the system. Remove the HVAC fuse for a couple minutes and then put it back in. Start the truck and let it idle for a few minutes. Check to see if ...

...blend door itself can also be broken. This happened on my Tahoe. Typically it is a very labor intensive and costly fix to replace a broken blend door, as the dash must be removed and the plenum ...

...blend door actuator located on 2006 Chevy Silverado? How do I change the blend door actuator on a 2006 Chevy Silverado? My ac works, but my heater blows cold air. Is there any way I can replace ...

blend door and when it fails it usually moves the door all the way to the "hot" position. Sometimes if you shut the vehicle off for a bit then restart it the system will work fine for a while then the

...vents the blend door actuator located on the air box (right hand side under dash) is prob. inop. worst case senerio the blend door its self is broken. I have replaced the actuator more than

...was installed the dealer fixed it not sure what the problem was well it could be a blend door actuator, heater core pluged up, blend door broke or jammed, it can also be your climate control