...swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves. 2. Remove the two ...
Question about Cars & Trucks
...swing portion in the garden through the Winter because I was in hospital. I need to replace the seating material on part J shown in your Assembly Instructions. I am a fully qualified retired ...
...swing up pivoting on the top bolt. You can remove this top bolt, but support the weight of the assembly with wire to the suspension spring - so as not to stress the brake hose. Remove the brake pads, ...
assembly. Pulled with great force. Stuck in there.Any thoughts? Take car to Nissan dealer. Tell them to fix the headlight. Problem solved. There is a set of very well written instructions here; http:/
...swing the clip away from the bulb.Remove old bulb. Insert new bulb making sure the locating tab is in the correct position.[Use the mirror to check]. Replace spring clip. Reconnect electrics. Replace ...
...swing rearward. Remove the bolt holding the brake pedal support bracket lateral brace to the left side of the vehicle. Disconnect all electrical connectors from the steering column. Remove the 4 nuts ...
...swing-down door. Disconnect electrical connector. Remove 3 mounting bolts. Remove APPS assembly from battery tray. If cable is to be separated at APPS, unsnap cable clip from ball socket. Release ...
...Swing the straps away from the tank and lower the jack. Balance the tank with your other hand or have a helper assist you. The tank is bulky and may have some fuel left in it. If its balance changes ...
...swing the bracket away from the bumper, you need to slide it forward to remove it from the slot in the bumper cover and fender. You will probably scratch some paint off of this bracket with the ...
251 questions posted
Usually answered in minutes!
658 Questions
91 Questions
110 Questions
71 Questions
11 Questions
