2008 Hummer H3 "change back turn signals" Questions

...signal When using the turn signal to turn right I have a rapid turn signal, The front light works, but the back light doesn't. Turning left all works as it should. the back light is blown. change

...back). Also, when the signal arm is pushed down for the left turn it clicks faster than the right turn. when a bulb fails on one side of the indicators the other bulb, same side, flashes faster, ...

change the tail light bulb? The process for replacing tail light bulbs is the same in all models. If you have a burnt-out tail light bulb, you may need to replace the brake light, the reverse light or

...you change rear turn signal bulbs? open rear door remove the two screws and gently slide the rear lense out. You should be able to take the bulb out from there replace it and slide the lense back

...change at all I put the old switch back on and changed the turn signal/ hazard flasher. This stopped the right rear light from blinking fast, but still no front right blinker. I put the new turn ...

...back up right turn signal works. Seems you checked what you could and the only thing left is the turn signal switch. The contacts for the left turn signal may have failed. first check your hazard ...

You change the turn signal bulb from under the hood. It is up on the back of the housing. It twists a little counter-clockwise. Then it pulls out to change. Then just put it back and turn it clockwise

...change driver side front From under front wheelhouse, remove access cover behind park and turn signal lamp Through access hole in wheelhouse, rotate park and turn signal socket counterclockwise one ...

...not flash both front and back, I have changed the front and back bulbs. Any suggestions? Thank you the turn signal switch is probably bad remove cover and check out puts with a test light to make ...

...turn signal switch now it dont work?? he puts the old relay back in and its clicking like mad, HELP!!!!!! i can get my van jumped but with the van the inner light kept turning on and blinking making ...