2008 Chevrolet Silverado 2500HD 2WD "remove bed" Questions

Ad

Question about Chevrolet Silverado 2500HD

2 Answers

...remove the bed (usually held on by 8 bolts, also dont forget to remove the bolts holding the fuel filler neck to the side of the truck bed, and trace the tailight harness from the taillights to the ...

Ad

Question about Chevrolet Silverado 2500HD

1 Answer

I would like to remove my truck bed on my 2500 hd. How is it attached as there are no bolts through the bed like the older models. NO BOLTS? Theres got to be some somewhere.

Ad

Question about Chevrolet Silverado 2500HD

1 Answer

bed up on the drivers side, remove the four bolts on the drivers side and loosen them on the passengers side. Using a hydraulic jack and several lengths of 4x4 and 2x6x6 blocks, carefully lift the bed

Question about Chevrolet Silverado 2500HD

1 Answer

...sending unit and others it comes as a module which means the pump and sending unit come together. Not sure what yours has. When changing I find it easier to remove the bed that to drop the fuel

Question about Chevrolet Silverado 2500HD

2 Answers

...remove it from the engine compartment. To install: Route the belt over all the pulleys except the water pump and/or the tensioner. Refer to the routing illustration that you identified as a match ...

Question about Chevrolet Silverado 2500HD

1 Answer

...remove the bed. Much easier to remove the tank, IMO. Since few vehicles have a drain fitting on the fuel tank, you'll probably have to siphon the fuel out. Don't even think about sucking on a garden ...

trucks the bolts are removed from inside the bed and others from under the bed though the frame. then get help to pickup the bed and turn it to gain access to the pump or remove the bed from the frame

Question about Cars & Trucks

1 Answer

...remove the bed of "my particular brand/model". That said, maybe these will give you some clues: https://www.youtube.com/watch?v=8qA_Dn99CcE One person fastest easiest way to remove bed or How to ...

Question about Chevrolet Silverado 2500HD

2 Answers

...remove the bed to get to the top of the tank or remove the tank I think it is easier to remove the bed no way its better to drop the tank down only two straps versus 6 very rusted bed bolts. at most ...

Question about Chevrolet Silverado 2500HD

2 Answers

Remove 6 bolts that hold the bed on. Disconnect the wiring harness in the rear of bed where it splits off to each tail lamp assy. Remove 3 small hex head screws inside fuel fill door. I usually remove

Not finding what you are looking for?
Cars & Trucks Logo

120 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...