Question about Chevrolet Silverado 2500HD
Brake controller not communicating w/ 7 pin connector I have an 03 Chevy 2500HD that I installed a brake controller on. After installing the controller, I hooked it up the camper to see if the camper ...
brake lights cruise control not working trailer lights, brake lights, and cruise control not working and fuses not blown brake switch and cruise control unadjust
Question about Chevrolet Silverado 2500HD
...working when the weather gets cold. Could you tell me what is causing this problem. Make sure your brake lights work. May be bad switch,the cruise control runs through the brake light switch by the ...
Question about Chevrolet Silverado 2500HD
...Brake lights are not seperated but are tied into the turn signal control. If the turn signal on that side doesn't work,but does on the other sidem chk connections on tail light assembly. No offence ...
Question about Chevrolet Silverado 2500HD
...working. I have tried to repeat this with no success. having same problem. narrowed it down to brake light switch. going down road and cruise wont set, messed with brake pedal and it will arm have ...
brake light wiring diagram brake light stays on after the truck is shut off or comes back on by itself after awhile. I have removed the switch from the peddle and it says on, also when the lights are ...
brake actuator and test the blue wire. If there is nothing at the actuator, check the black wire. It is power to the controller. If no power there, check fuses again. If it does pick it up at the plug
...brake controller works, and sometimes it doesn't. I can't take the risk of Chevy reprogramming my computer as it's been modified...if you know what I mean. Help! I bought this truck off of Ebay and ...
no brake,turn, but lights wk I installed a brake control on a 2007 crew cab4x4 silverado. I have tail lights, but turn signal and flashers and brake lights wont wk? check fuse's, if that doesn't work ...
brake controller installed. If there is one installed probe the blue wire coming out the back end of it and press the brake to be sure there is brake output. It is possible for a controller to go bad,
120 questions posted
Usually answered in minutes!
241 Questions
48 Questions
21 Questions
5 Questions
4 Questions