...door lock solenoids are integrated into the door latch assembly, and are notoriously weak. They will work fine sometimes, others they just seem to barely move or not at all. You will need to replaced ...
...door lock sensor than needs to be replaced. Is this hard to fix yourself, or I should send to a shop for replacement or repair? I noticed the problem when the chirp doesn't happen when I push the ...
Question about Chevrolet Silverado 1500
...door lock actuator and re-programmed locks, with no resolution. Andy, does the actuator make any noise when you press the lock switch? If it does not make any noise than you have a faulty control ...
Question about Chevrolet Silverado 1500
...actuator? I have the same problem. The rear door actuator is bad. you have to remove the interior cover and pull on the 2 cables that release the hatch door catch. replace the lock actuator ...
had the same issue on my 2006 Caravan. Both door lock actuators were broken (within a couple of weeks of each other). I replaced them both myself; actuator switches were expensive (close to $100 each)
Question about Chevrolet Silverado 1500
...trying to engage but it doesn't work. Door will lock and unlock manually. Sounds like the electric actuator is not connected inside the door. Ford Fusion car transponder ring or ...
Question about Chevrolet Silverado 1500
...door lock motor on a 2006 Mitsubishi Eclips GS. How do I remove the motor? The door panel is removed. first take out actuator that is attached on the motor itself i believe there will be plastic ...
...Door lock issue I have a 2006 Chevy Impala. The driver's side passenger door remains in the locked position. Thus, I cannot open the door. It does not unlock with the key fob or the unlock switch. ...
Question about Chevrolet Silverado 1500
...door lock will not work with remote or interior switches. Has to be worked manually. All other locks work as they should via remote and front door switches. The manual switch flexes when triggered ...
Door Lock Actuator Door lock actuator - how hard is it to replace? Interesting that you and I are both looking to change this out. I'm thinking of doing it myself. This source might be helpfulhttp
333 questions posted
Usually answered in minutes!
4,236 Questions
159 Questions
130 Questions
67 Questions
56 Questions