2008 Chevrolet Impala "car wiper motor stop" Questions

wiper blade off the car - turn on the motor - and then shut it off - now put the entire units back on where they should stop please let me know if this fixes your problem. There are disk ring switches

Wiper motor Extremely cold here wiper blades stopped working. Can still hear motor. But blades wont move. While driving blades went erratic on the windshield then stopped Possible wiper linkage has ...

...car turn wiper moter on then off. turn ignition off if wiper motor is good it should put spline in off position and now all you need to do is replace wiper arms in the correct position they would be ...

...or linkage. If it were an older car and you did this, it would have simply stalled the wiper motor with no damage; go figure! I had to buy two new wiper arms at $45 each! Thanks for the new way

...power and ground to your wiper motor if you have power and ground at electrical connection to motor then motor is bad, if your not getting power and ground then you need to look into wiper

...side turn your wipers off, then take the drivers side wiper arm off, thenlay the wiper on the windsheild where u want it to stop , then put the arm into the grooves(on the wiper motor)

...wiper arms but nothing helps. Does the motor have to be reset so they go back to the proper location when turned off? check to make sure the wipers are at its right angle on the vehicle, loose the ...

...car back on. This should relearn the wiper index. This can happen if the wipers freeze to the windshield and you turn the wipers on. There is a plastic (or sometimes metal) shear pin that is part of ...

...wiper motor circit board would cause this and it's been know to have cause the wipers to stop working at all. There was a recall that GM was checking the board's and replacing the bad ones. Good luck ...

...stop halfway down the windshield and not work at all. I can hear the motor turning with a slight grinding noise. I removed the covers and the arm and the motor still stuck in the same position. ...