...switch to disable the child lock near the latch on the door. Door panels generally can not be removed with the door closed. There are plastic rivets that pop out when pulling the door panel away from ...
...remove the inside door panel in order to remove the switch assembly. There are 9 or 10 scews to take out and then the door panel will pop off the door and then lift the panel upward to clear glass ...
...remove the door lock as most cars have an anti theft type bolt that holds the ignition switch on. If you choose you can get the ignition switch off if you can access the bolts with a hacksaw blade. ...
...Remove any and all screws from the door panel, including removing lock and window controls. then take a large flat-tipped screwdriver and pry off the panel all the way around. FInally lift panel up ...
...remove to stop the central locking and just lock and unlock the car manually. Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information ...
...remove the panel, look the door over and find the 6, I think that's how many there are, screw covers, 2 on each end of the door liner and 2 under the door handle. The ones on the otter edge''s of the ...
...Remove the switch from the door trim panel. 2.Check for continuity between the terminals. If continuity is not as specified in the table, replace the power window switch. POWER WINDOW MAIN SWITCH ...
Question about Hyundai Elantra
...door the alarm went off the trunk switch will not open trunk to get keys out trunk how do I open trunk The solution is to pull out the back seat to get into the trunk. There are two bolts holding the ...
switch will not open the trunk. How can we get into the trunk of the 2007 elantra from the back seat? Remove the back seat. Back seat has two parts, bottom section that you sit on and back section. In
390 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
508 Questions
493 Questions
