2008 Hyundai Elantra "brakes done brake light" Questions

Ad

...loose & needs to be adjusted & tightened up it is activated by the brake pedal if you have a good look I'm sure you will find it & see what needs to be done......hope this ...

Ad

Question about Hyundai Elantra

1 Answer

...done? Look at the brake switch. located just above the brake pedal, there is a plunger that goes in and out to make contact for the signal, sometimes the plunger sticks, could be the problem. If the ...

Ad

Question about Hyundai Elantra

1 Answer

...check engine light what ive always done is disconnect the positive battery cable then hold foot on brake pedal for 45 seconds then put positive cable back on start rig and it should go off. let me ...

...a rattle on front right wheel. it has done 150,000 km It appears to go away if put a light pressure on the brake pedal. Richard richard , i would think you have a wheel bearing gone or on the way ...

...done at canadian tire,brakes serviced engine cleaned etc...... today out for her first drive a light came out that said "check" any ideas???? If it's the check engine light, (see owners ...

...done it several times over several days the problem is all the service lights on the dashboard are lit up and stay lit after starting it. The clock works wipers work but the windows, radio, power ...

Question about Hyundai Elantra

1 Answer

...done business before and all assumptions are off the table. For an engine - make that any engine and irrespective of manufacturer - to run, you need three things to happen inside the engine, ...

Question about Hyundai Elantra

6 Answers

...brake booster. Let me know, also, what codes have been pulled? Hi! The problem will be on the MAF (mass air flow) sensor. The MAF has big contribution on engine performance specially on the idle and ...

done If you did the brakes correctly then the brake light should have gone off when you restarted the car. Exactly what brake work did you do? A simple pad change or did you have to open the system up

...brake lights Check that there hasn't been any wiring done which can confuse the lighting main switch, if there has been checked wiring work done, check all polarities are correct on the added ...

Not finding what you are looking for?
Cars & Trucks Logo

390 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...