#160; To confirm the problem, the basic troubleshooting is required. Click this link below and follow the troubleshooting:------
...issues,i suggest to you go through this help links. Click this link below and go through the troubleshooting procedure to take care of the problems :----Car runs ...
TROUBLESHOOTING P1402. Failed EGR SOLENOID VALVE, EGR TEMPERATURE SENSOR FAULT, STUCK OPEN EGR VALVE replace your egr valve
the blower motor worked intermittenly and now has stopped working. how do i troubleshoot to determine the problem take the wires off the blower motor and run to battery if the motor is out it will not
...turns over but does not start ive cleaned the plugs what else is there Here's a no-start troubleshooting guide to help you narrow down some of the possibilities. Hope it helps, good luck! ...
my 2006 accent ac fuse keeps blowing I put a new fuse in and it blows within mins. only solution to this is to take it to a shop and have them troubleshoot the wiring.... you have a short circuit ...
...light dead dome light could have blowed bulb. I've written up a detailed step-by-step dome light troubleshooting guide for a 1999-2005 Hyundai Accent that should be very similar for your 2008:
...wrong make sure battery terminals are tight. If tight, suspect failed solenoid. For additional troubleshooting, please see my tip at ...
Troubleshooting code PO442 check engine light on. When I put in gas, gas nozzle keeps cutting off like tank is full The code PO442 is a small leak somewhere in the evaporative emissions control system
...getting cracked or dirty and needs to be cleaned. To confirm the problem, the basic troubleshooting is required. Click this link below and follow
360 questions posted
Usually answered in minutes!
1,131 Questions
1,082 Questions
1,047 Questions
517 Questions
500 Questions
