...clean the throttle body and flap. with the a tooth brush and throttle body cleaner from the parts store.this should fix the sticking im not sure about your stalling problem. also after you clean the ...
clean the throttle body and the idle air control valve (IAC). With a can of throttle body cleaner, (follow instruction on the can) clean the throttle body blade and the IAC passage way in the throttle
...throttle body cleaner. Also sparay inside port (hole) that it was removed from. Careful with thin "O" ring usually at base where it mounts to side of throttle body. Usually a good cleaning will work, ...
...throttle body & clean it well & port it comes out of with throttle body spray cleaner, then re-install it. If it cures it for a while, then starts to do it again, replace it. Check your speed ...
throttle body was gummed up. They cleaned both and it runs fine now clean your iac valve I have 1998 ram 1500 5.2. It shuts off when I take my foot of the gas pedal to stop. Replaced the TPC. ran fine
...throttle body spray cleaner.. Careful, don't lose small "O" ring at base of it where it comes up flush against throttle body. Those things get gummed up at pintle and will cause stalling and give no ...
...throttle body. Make sure the connections are clean to it., but if you have to replace parts, I would start with the throttle position sensor on the side of the throttle body. It's cheaper and more ...
99 dodge ram surges up and down when cold at idle Clean Throttle body with recommend clean like Gum out .
...is not too tight Clean throttle body, change the fuel filter, any codes? you could do some adjustment that last thing. It is set screw at the throttle body. You can put DW40 on cable to throttle
641 questions posted
Usually answered in minutes!
1,788 Questions
197 Questions
173 Questions
143 Questions
114 Questions