2008 Volvo S40 "jb weld" Questions

A hole in the sump How to fix a hole in the sump. JB Weld Epoxy is what I normally use.

...jb weld but when I filled it back up with oil the engine won't start. I was told to prime the oil pump and then have it build pressure back up but I don't know how to get to the oil pump, any help ...

hole in gas tank get a tube of J.B. Weld, drain the tank, give it a couple hours for the hole to dry, apply enough J.B. Weld to cover the hole. (you have to be very quick with the J.B. Weld or else ...

...jb weld on my exhaust manifold to put over a hole about the size of a quarter? NO that Jb weld would fall off in less than a day. It get really hot and your best bet is to go to autozone and ask if ...

...do you fix a hole in the gas tank quick temp. fix would be jb weld for small holes i had a enduro motorcycle that had a broken pit **** at the bottom of tank and jb weld worked for

...it is for crankcase ventilation of vapors. It connects to the PCV valve. JB Weld would be the best way to attach it. Clean the area and wipe with alcohol to get any oil resdue off. Then JB Weld

...high heat jb weld if that dont work then new oil pan i loaned my car to some 1 and he ripped a hole the size of a plum in my oil pan i cleaned pan piece of sheet metal and jb weld still driving ...

...JB Weld be used to seal the oil pan As good as JB Weld is, I doubt that it would work in that application. The bad oil pan gasket may still let the oil out and it will travel along the oil pan rail ...

...JB Weld now my radiator fan i think is really really loud what's wrong Not related at all. At least you know the fans are working. I would be more concerned about the hole in the oil cooler housing, ...

JB weld on it? or will the oil eat away at it? JB Weld should work, however, I would recommend actually replacing it or bringing it into a shop for a more permanent fix. The JB Weld will probably only