2007 Mercedes-Benz E-Class "right front tire roar" Questions

...front wheel bearing. as your driving turn wheel left and then right and see if the noise gets worse , usually the noise will get worse on the oppisite wheel of which you are turning eg: turn left and ...

front end when going speed Do you have tires installed with directional tread? If you do they will have indicators (usually some type of arrow) indicating which direction the tires are to be installed

front right wheel area. Loud roaring sound in front right wheel area. It sounds like my front driver wheel is flat and hitting metal..I had tires checked they are fine. It sounds like clunk, clunk and

...front right axle? what is this roaring sound from the right front axle? Raise the front of your car off the ground with rear wheels blocked car in neutral spin front tires one side will have a rough ...

...right. That description indicates wheel bearings, replace all 4 in the front end of your cougar. I suspect that the right front bearings have failed in the STATIONARY race, at the top of the

...right tire that sounds like its getting louder Hi my name is Allen! With roaring noises coming from the wheel area, we must be very careful in diagnosis because it could be the "Wheel Bearing" which ...

...front end that decreases or almost goes away in a right curve or turn. can't tell if it is the right or left wheel THIS NOISE IS USUALLY THE HUB. HAVE SOMEONE GO WITH YOU ON A TEST DRIVE. GET THE ...

...bear right see which way quiets it down. That really only works if it is in the front, however the rear ones do go bad as well, however it is usually the front ones that go with a roar. Hope this ...

...front driver side. I had the wheel bearing replace and switch tires it's still roaring. But when I turn the wheel to the right it goes away until I turn the wheel straight then it comes back. CV ...

...front driverside. Swayed side to side and going left it kinda clears up to the right gets worse. Thinking steering box or drive shaft u joints but havent gotten to that point yet.. PLEASE HELP!!!! ...