2008 GMC Yukon "cleaning throttle body sensor" Questions

Ad

...Flickering light's could be caused by a bad diode in the alternator . Fluctuating idle could be caused same alternator problem or dirty throttle plate. Throttle Body Cleaning To Restore Idle ...

Ad

...throttle body and wwored for bout 2 weeks In my 2000 sebring I would be driving and lose power no throttle response,everything else still on. It was the crank sensor. Went to auto zone for free scan ...

Ad

Question about GMC Yukon

1 Answer

...throttle body, replaced plugs and wires, the main engine computer was replaced 7 months ago but at crank idle drops then surges over 1000rpm then drops to normal. Is also surging up at times while ...

Question about GMC Yukon

1 Answer

throttle body, checked for leaks around intake plenum, replaced spark plugs and wires, but still does it, some times it will start and be on for a min or two then stalls and other times wont even turn

...pedal, which in turns sends a signal to the throttle body. I have an 04 Suburban that feels much like you described & it is all electronic. It could also be your throttle body needs to be

...throttle body, no manifold leaks, engine is timmed good with gm tech 2 scanner. Pulling teeth with no engine lights It could be the timing chain or belt slipping from being worn out. Although another ...

...throttle body if it is in red change filter also check and or change fuel filter these to filters usually dont set off a trouble[ obd ll ]codes also when was last tune up --wires,cap,plugs,egr ...

...option to start with on the P0121 code to fix it? I have been told by some to clean the throttle body and others to replace the sensor. This is a rheostat. It wears out. You should replace the

Question about GMC Yukon

1 Answer

...your throttle body if its coking up with carbon, better have it cleaned. Who knows? you might get lucky, A dirty throttle body is also one of the possible causes. Maybe your next tune up is on

Question about GMC Yukon

1 Answer

throttle body. Thanks. This could be several things.  I would check the Fuel lines for pin hole leaks first, then the vacuum lines and finally the Fuel pump itself.  Make sure to include the

Not finding what you are looking for?
2008 GMC Yukon Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Yukon
1999 GMC Yukon

593 Questions

2004 GMC Yukon
2004 GMC Yukon

524 Questions

2001 GMC Yukon
2001 GMC Yukon

309 Questions

2007 GMC Yukon
2007 GMC Yukon

326 Questions

1996 GMC Yukon
1996 GMC Yukon

238 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...