...I would check the ground for the plate lights. You have to remove the steering wheel and dash trim to get to the cluster for removal. Let me know if you need to know how to remove the
...lights up on dashbord is batery and nothing els no clock or obdometer. You need to start with checking the fuses, sounds like they are blown. Fuse panel is on side of drivers dash, you need to remove ...
lights still flickering. Also within first minutes of driving, 3 chimes sometime ding. Any ideas? check the ground wires under the battery tray you will need to take out the battery and hold down tray
lights flash, but car still tries to crank. And hopefully ecu has enough power to out out code u0100= no communication with ecu. Unfortunately the ecu will need to be replacd. The ecu is located under
lights out, need to know where fuse box is Are the lights out on both sides? I read where VW was having issues with the circuit boards. Mine just had to be replaced on the left side. Try this: https:/
...need to get this fixed and I do not have a local VW dealer anywehre around. I have tried local dealers.. but nothing has helped-still having the same old problems.-Can someone please please help me?? ...
...lights switch. You have to pop out the old one with a flathead screw driver. Remove it and simply place the new one on. You might need some needle nose plires to pull the actual relay out and also to ...
light on dash of car light going on and off NEED TO VISIT VW DEALLERSHIP!!!!THEY KNOW WHAT TO DO!!!!!
...unit serves turn signal & hazard lights, you should find it under the dash on drivers side,it may be a square or round unit with a connector plug on the top.....hope this
...on my car what does this mean? is it ok too drive The glow plug on the dash indicates various problems with the engine, you need to get diagnostics done as soon as possible as it might become
786 questions posted
Usually answered in minutes!
1,072 Questions
1,150 Questions
968 Questions
1,003 Questions
917 Questions
