2007 Hyundai Accent GS Hatchback "vct replacement" Questions

...thinking the CVVT control gear is bad. The main thing to check is to verify the operation of the VCT solenoid. You're looking for a sticking or stuck VCt solenoid valve caused by

...VCT replacement? when I try to put it in after replacing the VCT? I had it together once without assembly lube but took it apart to put the lube on. I have broken 2 cams what am I doing wrong. It ...

How do I change a vct solenoid on a 2007 f150 5.4 The VCT solenoid is located under the valve cover toward the front. There are a total of two solenoids, one on each bank (side). If you look at the ...

...vct clutch so im at wits end any ideas is there anyway to get the correct timing without loosening this bolt loading the spring or something PLEASE HELP!! this may help you 98 Contour 2 0 timing belt ...

if past due or low. P1383 code possible causes Cam timing improperly set Continuous oil flow to the VCT piston chamber VCT solenoid valve stuck open Camshaft advance mechanism binding (VCT unit)

...lights but did run scan at Autozone and got PO 302 and 340. Said replace Variable Camshaft Timing (VCT) Solenoid. Transmission fluid looks good. Friend said thinks is Throttle Control Module in ...

...computers and all give me different codes. Any suggestions would be much appreciated. replace your VCT sencor (variable cam timing) on right bank easy to get to very front of valve cover on top with ...

...now Low oil level Cam timing improperly set Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber VCT solenoid valve stuck open Camshaft advance mechanism binding (VCT unit). ...

...one or more of the following has happened: Faulty oil control valve (OCV)Open or short in the VVT/VCT circuitOpen or short in the OCV / solenoid valveDamaged computer (PCM) Possible Solutions Some ...

Truck shakes bad and stalls I've replaced plugs coil packs vct solenoids and new o2 censors problem started when I cHanged vct solenoids ANY CODES?COULD BE MODULE.