2007 Hyundai Accent GS Hatchback "replacing oil control valve" Questions

Ad

Question about Hyundai Accent

2 Answers

...fix whatever is leaking on them. If it was on the electrode, the above is true. this fault could be either worn oil control rings or worn valve stem oil seals or the plug was faulty and not ...

Ad

...valve(s)with out tearing it apart first? if you have damaged rods or valves in your engine, there would be almost no chance that the engine would run or even start. it is quite possible that you did ...

Ad

...oil filter dirty, replaced did not solve problem. I'm thinking the CVVT control gear is bad. The main thing to check is to verify the operation of the VCT solenoid. You're looking for a ...

Question about Hyundai Accent

3 Answers

sucking air take some baby oil and run it around the gaset and put it back on and this should stop.p.s.dont remove the gas cap with the engine running or you will set of an evap emmison control sensor

Question about Hyundai Accent

1 Answer

...oil. I thought it was the head gasket so I started with taking the valve cover of and the gromet that cover the spark plug tubes were realy torn up so I replaced thoughs asuming it was the source of ...

...replacing the valve, change engine oil and filter and reset engine code. Possible Causes: - Intake valve timing control solenoid valve bank 1 circuit is open or shorted. - Intake valve timing control ...

Question about Hyundai Accent

1 Answer

...timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine

...replacing the valve, change engine oil and filter and reset engine code. When is the code detected? When there is a gap between angle of target and phase-control angle degree, the valve will stop ...

Question about Cars & Trucks

1 Answer

...oil control valve How to Replace Oil Control Valve on NF 2.4L Hyundai ... ? 1:51 www.youtube.com/watch?v=m3WsFb00Fik Oct 1, 2013 - Uploaded by stephen9666 Here's how I replaced the oil control valve ...

...oil control ring on piston or oil control valve on head or valve guides to worn or improper valve seal replacement or head gasket cracked head etc even with good compression the oil control rings can ...

Not finding what you are looking for?
2007 Hyundai Accent GS Hatchback Logo

264 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Hyundai Accent
2000 Hyundai Accent

1,131 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,082 Questions

2002 Hyundai Accent
2002 Hyundai Accent

1,047 Questions

1999 Hyundai Accent
1999 Hyundai Accent

517 Questions

2003 Hyundai Accent
2003 Hyundai Accent

500 Questions

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...