2007 Hyundai Accent GS Hatchback "left signal light fuse" Questions

signal relay, it is as follows.To the left of your left foot, above the pull lever where you open your trunk. For the Flasher relay, you'll have to go behind the steering wheel column and take off

...left turn signal on they flash really fast and the light on fender doesnt light up now with no turn signals on and you push horn button left side starts flashing with the fender on flashing also and ...

left and center brake lights not functioning on my 2000 Hyundai Accent. bulbs are good. the right side brake light and all tail lights are functional, and the fuses appear good. replace the turn ...

...signal (indicators) . I have realised that it starts workign after running the engine or drving for a considerable while . I have no idea what i should do! i couldn't even find the fuse boxes below ...

...signal to go left or right it attampts to work but does not. I dont have a repair manual. it could be problem with connector of combi switch, it is lose. please check it, or check for flasher in fuse ...

...left turn signal. Light. Front and back No turn signal light on left side Fuse 14 a 10 amp fuse in the underhood fuse block feeds the left side lights. Are the parking lights working on that side ? ...

...signal Left turn signal The fuse for the signal lights controls both lights. If the fuse is blown none of the signal lights will work. If the left front/rear signal is not working or is flashing fast ...

...left side? Turn signal and brake light is thesame bulb , well,used to be. Check the bulb sny way. Circuits are not divided as you are thinking. Imports have turn signals on their own, separated from ...

...left signal stayes on . also weather or not my left signal stayes on . also weather or not its relayted my fuse for the gauges,tail lights and front marker lights blows 20 minutes after replacing ...

...left signal on I have a 1998 Dodge Ram 1500 4WD, and all of the sudden, when I lift up my turn signal deely bobber to turn left, I blow the fuse for the signals and then have none. If I flip it down ...