How to change a csmshsft sensor on a 2008 cadillac srx Before you replace a part you may or may not need . Why ? What code ? Does the vehicle run ? There has been a lot of confusion on these vehicles ...
Question about Cadillac SRX
I just purchased a 2005 cadilllac srx v8 n i cannot get the third row seat tto function? Help? Rear Seat Switches There are three push button switches that are used to operate the power folding seat; ...
Question about Cadillac SRX
where is module on brake peddle for shifting out of park on cadilac srx4 2007 There is no module on the brake pedal . There is a brake switch , do the brake lights work ? If the brake lights work ...
Question about Cadillac SRX
...be performed when replacing. This allows the module to learn the full open and full closed positions of the liftgate. DTC B153A 00: Liftgate Latch Switch Signal Circuit DTC B153A 08:
Question about Cadillac SRX
2007 Cadillac 3.6L srx, check engi, code p00017 crank sensor - replaced, still running rough and giving me a misfire on 1,3&5. Changed plugs, still 1,3&5 misfire - 155000 miles, could it need new coil
I have a p0008 code & I'm worried P0008 CADILLAC - Engine Positions System Performance Bank 1 The ECM detects that both camshafts on either bank of the engine are mis-aligned with the ...
How to replace pedal position sensor on 2004 cadillac srx This may be mounted on the throttle body and if it is you may, hopefully , be able to replace it . In some vehicles it can just be unbolted ...
Engine power reduced (came on) 2008 srx wad model My 2008 SRX also had this problem, at first I would turn the engine off and that would fix the problem, but then both the check engine light and the ...
How do I get key out of ignition or start car? Car sat for 2 weeks, put key in ignition to start, battery dead. Charge battery now switch will not activate starter and cannot remove key. Also rear ...
178 questions posted
Usually answered in minutes!
347 Questions
214 Questions
225 Questions
55 Questions
54 Questions